Gratis frakt över 1.500 kr. Vi förtullar!
Skriv produktblad

KO Propo RSx2 PowerHC

Inte längre lagerförd
Orsaken kan vara att produkten har utgått från leverantören, ersatts med en ny produkt eller har haft för liten efterfrågan. Eventuella frågor kan ställas till kundeservice.
Produktinfo
Tipsa en vän
Recensioner

Produktinformation

KO Propo RSx2 PowerHC
PS! Produkttexten är maskinöversatt från norska.

Storlek41 X 38 x 20 mm
Vikt70,5
Effekt0,13S/26,3 kg vid 6,0V
0,11S/31,6 kg vid 7,4V
Product details in english
Features
Current servos have the appearance of high speed and high power from the response of 2.4GHz and the power from Li-po batteries respectively. This creates a huge demand upon the servo. The RSx is the racing servo with the durability and operability to employ this high-spec demand.

Case
The middle case is machined from one piece of aluminum that incorporates the gear pins and motor being held properly in place. The top case rigidity has been improved with the addition of two screws in the middle to prevent flex and keep the gears properly aligned. The upper Hard Case (H.C) is also machined from aluminum. H.C is the distinction of durability for categories that demand high stress.

Motor
A servo motor is a very important part of a servo. The specification of a servo is up to the motor being used. We have developed a new motor suitable for the new R/C standard with numerous performance and stress tests.

Gear
The gears are made with a special Japanese aluminum. This gear is 45% lighter than brass and has the same hardness as steel. The ´Light Weight´ design provides a clean response for driving and reduces the burden on the servo motor. The thorough quality control of the manufactured gears ensures the least amount of backlash possible for smooth action. And Power and Pawer HC use Special Stainless Gear. It is very strong and useful for off load category.

ICS
You can change servo´s setting when you use our software" ICS Servo Manager".Ex, parameter of stretch. More retentivity in High grip condition, less retentivity in Low grip situation, You can select value by grip situation for best setting servos.

Contents
  • Servo x1
  • Grommet x4
  • Screw for Horn x1

  • Specifications
  • Torque:26.3Kg-cm Speed: 0.13sec/60deg(@6.0V)
  • Torque:31.6Kg-cm Speed: 0.11sec/60deg(@7.4V)
  • Dimensions: 41x38x20cm(Standard size)
  • Weight: 70.5g
  • Operating voltage: 6.0 to 7.4V(Lipo,Life,Ni-MH)
  • Hard alumite aluminum gear
  • Core-less motor
  • Dual bearings
  • Hard servo gear shaft
  • Aluminum top case
  • Aluminum heat shink middle case
  • Gold plated connector

  • Recommend category
  • 1/8 Off road 1/8 On road.
  • Mer info på engelska
    Flera tittade också på