Kraftfull borstlös layout för 1/10 sökrobotar. Layouten är designad för 2-4 cellers LiPo och motorn har 3,17 mm axel. Levereras med förlödda 4.0mm kulor mellan ESC och motor, batterikontakt måste lödas (ingår inte)
PS! Produkttexten är maskinöversatt från norska.
Tillsammans med den 1406 låga KV-sökmotorn för CC, levererar Mamba X utmärkt prestanda, komplett med tyst sensorbaserad drift. Kan användas på crawlers upp till 4 kg och upp till 2,3 kg för mer aggressiv rockracing.
OBS!* ven med vattentät elektronik är detta kit inte avsett för användning under vattnet. Kylfläkt på ESC måste tas bort när den används i våta omgivningar eftersom den inte är vattenskyddad (var extra försiktig vid temp utan fläkt).
Var noga med att välja batterier som levererar tillräckligt med A vid belastning. Castle rekommenderar att du använder LiPo-batterier på 5000 mAh 30C eller mer för denna inställning. Denna uppsättning toppar regelbundet vid över 100A.
ESC| Inspänning | MIN: 2s LiPo; MAX: 6s LiPo |
| Brems | Proportionell |
| Omvänd | Ja - med lockout |
| Mål | L: 54,4 mm |
| B: 35,2 mm |
| H: 30mm |
| Vikt | 101G med ledningar |
Motor| Inspänning | 2-4S LiPo |
| KV | 2850 |
| Max RPM | 100 Tusen |
| Storlek | 49,5 X 36 mm (LxD) |
| Vikt | 197G |
| Montera hål | M3 @ 25mm |
| Kylfläkt | Kan köpas setarat |
| Kontakter | 4Mm kula (hane) |
Product details in english
Putting the X in Extreme!
The Mamba X Crawler edition is our latest offering for the crawling crowd. We have taken our new 1406 low kv crawler motors and paired it with the high power, ultra reliable Mamba X ESC. This combo is ideal for low speed crawling or trail running in vehicles weighing up to 9lbs on 2s to 4s; it can also be used in more aggressive setups like rock racing and extended hill climbing on vehicles up to 5lbs. Your ESC will come with our new V2.02 firmware that has been enhanced for rock crawling and sensored operation.
FEATURES:
INPUT VOLTAGE RANGE OF 2S-4S (with included motor) with an internal 8A ADJUSTABLE BEC (5.25V-8.0V)
Housed in a RUGGED CNC-MACHINED ALUMINUM CASE and potted in WATERPROOF epoxy to withstand the most extreme driving conditions and environments.
Removable 30MM COOLING FAN
Recon G6 Certified
Paired with the improved 4-POLE 12-SLOT SENSORED1406-2850KV SLATE motor provides precise throttle control and buttery smooth starts
Convenient TRANSMITTER PROGRAMMING for six common adjustable settings.
Access to Castle´s INDUSTRY LEADING SOFTWARE with use of Castle Link USB (coupon included for free USB with purchase) and freely downloadable Castle-Link Windows program , or the Castle Link iOS App and a B-LINK Bluetooth Adapter (sold separately) for anytime, anywhere system adjustments.
Firmware updates available with use of Castle Link USB and Castle Link Programming Suite.
DATA LOGGING captures and records performance data for maximum optimization of both performance and battery life
AUXILIARY WIRE FUNCTIONALITY allows for "on-the-fly" adjustments such as ROCK RACE/CRAWLER MODE. These adjustments can be made real time, while driving, right from your transmitter.
Castle´s SMARTSENSE software, enabled by default in the Castle Link Programming Suite, will use the motor´s sensors to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is turning, it seamlessly transitions to Castle´s ULTRA-EFFICIENT sensorless mode with ELECTRONIC TIMING. Smooth sensored startups and high-efficiency sensorless running makes the Mamba X system produce more power and less heat.
QUIETSENSE is an innovative advancement in the design of sensored motors to deliver the highest precision and most efficient startup.
Mamba X ESC features AUDIBLE ALERTS that will notify you of possible issues with calibrations and error conditions to help diagnose problems in the field.
Mamba X is TELEMETRY READY which means owners of the Futaba T4PX or 7PX Transmitters will be able to purchase the Castle Creations Telemetry Link for S.BUS2. Real-time data such as ESC temperature, voltages and RPM can be monitored to ensure performance advantages and spare you the "unknown" parameters that all R/C enthusiasts experience at some point. Telemetry data provides another level of protection and can increase performance.
Package Includes:
Mamba X Electronic Speed Controller
1406-2850kv sensored brushless motor
210mm length sensor wire (for sensored operation)
Castle Sensor Harness adapter
Coupon for free Castle Link USB adapter
Drivers Ed and Quick Start Guides
Castle decal sheet
Electronic Speed Control (ESC)
Input Voltage Range:MIN: 2S LiPo
MAX: 6S LiPo (25.2V) (4s max with included 2850kv motor)
BEC Specifications:Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Operating Environment:Waterproof* design allows for use in nearly any environment.
Brake:Proportional
Reversible:Yes, but may be disabled for racing.
On/Off Switch:Yes
Cooling Fan:Yes, factory equipped (30mm), fully removable** (see Product Use Statements below)
Size:Length: 2.14" (54.4mm)
Width: 1.39" (35.2mm)
Height: 1.18" (30.0mm)
Weight (with wires):3.56 oz. (101g)
Connectors:4.0mm female bullets for motor connection.
Items Needed for Operation:Battery Connector required, Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs are recommended.
Product Use Statements:*Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. T Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.
**The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.
Max. Recommended Vehicle Weight:Less than 9lbs, with batteries, ready-to-run with included 1406 - 2850kv motor in low speed crawlers; 5lbs maximum for more aggressive setups like rock racing and extended hill climbingProgrammability:Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software or a B-LINK Bluetooth Adapter (sold separately) and the Castle Link iOS App.
Telemetry Link Capable:Yes
Tech Notes:
Mamba X setups frequently hit 100+ amps in peaks and not all LiPos are created equal. Surge ratings should never be used to determine a packs suitability for a brushless application. Recommended battery capacity for 1:8th scale vehicles is 5000mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell).
Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups.Applying voltages higher than 25.2V will cause irreparable damage to ESC.We recommend a high-current connector designed for high-powered electric systems, rated for 70+ amps. Invest in connector sets made for high-powered electric systems such as our Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs.
Motor specs
Input Voltage Range:2S-4S LiPo
Kv:2850
Max. RPM:100,000
Size:Length: 49.5mm
Diameter: 36mm
Weight (w/wires):197 g / 6.9oz
Shaft Size:Length: 15mm
Diameter: 1/8" (3.17mm)
Mounting Hole Specifications:M3 @ 25mm
Cooling Fan:Optional - Coming Soon
Connectors:4mm male Castle Bullet Connectors attached to replaceable 13 gauge wire; includes 210mm length sensored wire.
Application Guidelines:Ideal for 1:10 scale low speed rock crawlers/trail runners on 2S-4S weighing less than 9lbs. Can also be used in more aggressive setups in lighter 1:10 scale touring cars, stadium trucks or buggies weighing up to 5lbs.Max. Recommended Vehicle Weight:9lbs when used for low speed/moderate driving style like rock crawling and trail running;5lbs for more racing and aggressive driving styles.
Tech Notes:
Running modes: SMARTSENSE, Sensored, Sensorless with Castle sensored capable ESCs.
Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.
Mer info på engelska