Gratis frakt över 1.500 kr. Vi förtullar!
Skriv produktblad

DJI Inspire 2 Part37 Billaddare

Inte längre lagerförd
Orsaken kan vara att produkten har utgått från leverantören, ersatts med en ny produkt eller har haft för liten efterfrågan. Eventuella frågor kan ställas till kundeservice.
Produktinfo
Tipsa en vän
Recensioner

Produktinformation

Billaddare för Inspire 2. Mäter temperatur och spänning på cigarettändaren så att den kan sluta ladda sig om det behövs. Laddningstiden är ca 2h 30min för två batterier och 3h 40min för radio. Laddaren används med Inspire 2 batteriladdningsnav.
Product details in english
The Car Charger for Inspire 2 is used to charge the Intelligent Flight Battery or remote controller through a car?s cigarette lighter port. When charging the Intelligent Flight Battery, the Inspire 2 Intelligent Flight Battery Charging Hub is a must. It comes with low-voltage protection and overheating protection which automatically cut off charging if your starting battery voltage is too low or cigarette lighter port exceeds a certain temperature.

Highlights
The charge time for two fully charged batteries is 2.5 hours.
Low voltage protection
Overheating protection

In the Box

Specifications
  • Product Model: C6S90-2
  • Operating Temperature: 32° to 104° F (0° to 40° C)
  • DC Input: 12.3-16 V (Sedan) ; 25-30 V (Coach)
  • DC Output: 26.1 V; 3.45 A; 90 W
  • Charge Time*:
  • Two Batteries: Approx. 2 hr 30 min
  • Four Batteries: Approx. 5 hours
  • Remote Controller: Approx. 3 hr 40 min
  • * The charge time was tested in a lab environment at room temperature and should be taken as reference only.


  • Compatibility
  • Inspire 2
  • Inspire 2 - Battery Charging Hub
  • Mer info på engelska
    Flera tittade också på