Produktinformation
Flott Yak med vingespenn på 168cm leveres her fra Phoenix Model som ARF. Modellen er klargjort for motorinnstallasjon etter kundens ønske og tilbehør for montering av både fuel- og elektromotor følger med. Modellen har avtakbar canopy for enkel tilkomst til batteribytte og elektronikk-innstallasjon, og all øvrig hardware følger også med.
PS! Produkten kan skilja sig från videon.
Läs merKlippet har lagts till som relevant information till produkten, men är inte nödvändigtvis identiskt. Innehållet i en produktvideo, testvideo eller recension kan skilja sig från produkten som säljs. Det kan gälla färger, specifikationer, versionsskillnader, regionala skillnader etc. Det är produktens namn, beskrivning och bilder som du ska hantera vid köp av varan.
OK
The new Yak54 is enhanced with design and structural upgrades that boast a fresh, progressive look and make them extreme aerobatic performers to be reckoned with. This plane allows pilots to achieve unlimited potential for sport and 3D flight - harriers, blenders, knife-edge, torque rolls and more. The Yak54 offers lightweight balsa and light plywood construction dressed in genuine ORA COVER for a vibrant look. Also in the kit is a complete hardware package, an instruction manual, stick-on decals. Hardware items include aluminum landing gear, wheels, engine mount, fuel tank, control horns, clevises, and control rods. This Yak54 is the best choice for you.
Technical data- Wingspan: 1684mm (66.3 in)
- Length: 1605mm (63.1 in)
- Flying weight: 4700-5200 gr
- Wing area: 54.7 dm2
- Wing loading: 87g/dm2
- Wing type: Naca airfoils
- Covering type: Genuine ORACOVER®
- Gear type: Aluminum Hi-grade for main gear and spring wire for tail gear (included)
- Spinner size: Plastic 70mm (included)
- Radio: 4 channel minimum (not included)
- Servo: 6 standard hitorque servo: 2 aileron; 2 elevator; 1 rudder; 1 throttle (not included)
- Recommended receiver battery: 4.8-6V / 1200-2000mAh NiMH (not included)
- Servo mount: 21mm x 42 mm
- Propeller: suit with your engine
- Engine: .120 / 2-stroke or .120/4-stroke glow engine or 20cc gas engine (not included)
- Motor: brushless outrunner 2000-2400 W, 450 KV (not included)
- Gravity CG: 125 mm (4.9in) Back from the leading edge of the wing, at the fuselage
- Control throw Ailerons: Low: 12mm up/down, 10% expo; High: 15mm up/down, 10% expo
- Control throw Elevators: Low: 12mm up/down, 12% expo; High: 15mm up/down, 12% expo
- Control throw Rudder: Low: 30mm right/left, 15% expo; High: 45mm right/left, 15% expo
- Experience level: Intermediate
- Plane type: Scale Aerobatic
RECOMMENDED MOTOR AND BATTERY SET UP
- Motor: RIMFIRE .120 (not included)
- Lipo cell: 6-12 cells / 4000 ? 5500mAh (not included)
- Esc: 80-100A (not included)
Feature
Capable of both precise and extreme 3D aerobatics
Designed for compatibility with both GP and EP flight
Genuine Oracover covering
Bolt-on two-piece wing for easy transport and setup at the field
Removable canopy for easy change lipo battery and set up radio
Extremely lightweight laser-cut all-wood construction
Durable factory-painted fiberglass cowl
Prepainted pilot figure, preinstalled in cockpit
All hardware included