Gratis frakt över 1.500 kr. Vi förtullar!
-27%
HemMotor & tillbehörElmotor & tillb.ESC/RegulatorerESC för flygplan/helikopter
Skriv produktblad

CC Phoenix EDGE LITE 75 - 34V / 75A ESC w.5A BEC

Handla nu, dela upp eller betala senare. Läs mer
kr 1.095,-
1495| 1.495,-
3|2|195
ArtikelID: 25755, Produktnr: CC010-0112-00
Produktinfo
Tipsa en vän
Recensioner

Produktinformation

Phoenix Edge-serien är designad för helikoptrar från 450 till 800 storlek, eller flygplan upp till 1,20 storlek + (Se rekommenderade storlekar för varje styrenhet i specifikationerna.) Som alltid från CC består Edge-serien av de bästa komponenterna och erbjuder ledande mjukvarufunktioner med datalogning och USB-programmeringsfunktioner med CastleLink. Nytt och i Edge-serien är att styrenheten har en extra länk som kan programmeras av användaren och ger funktioner som användaren bara har kunnat drömma om förut. Med den vita aux-sladden (se gul bild) kan du till exempel justera regulatorns förstärkning mellan flygningen, användas som en hörbar signal för "oväntad landning", användas som RPM-utgång för 3-axlig gyro med RPM-stöd, användas som regulator eller mottagarsäkring.
PS! Produkttexten är maskinöversatt från norska.

Specifikationer

Celler2S-8S LiPo
Vikt81G
Storlek (Lx Bx H)66X 30,5x 21,4 mm
Power Pull75A
BEC5A
Product details in english
ApplicationsN/A
Input voltageMIN: 2S LiPo
MAX: 8S LiPo
Max continuous amperage at full throttle75 amps*
BEC voltage (voltage regulator for powering radio and sevos)User selectable choice from 5 to 8.4 volt output
BEC output amperage5 amp peak**
Width30,5mm
Length66mm
Height21,4mm
Weight w/wires81g
Weight w/o wires41g
ProgrammabilityFully programmable Castle feature set using Castle Link USB adapter
ConnectorsBattery and motor connectors sold separately
Tools needed for installationSoldering iron and solder to attach bullets to motor wires and battery connector to power wires.


*RC HOBBY APPLICATION RATING: 75 amps with appropriate cooling. Phoenix Edge Lite controllers are designed without a heat-sink for applications with extreme air-flow, such as EDF planes, or applications with average current requirements much less than peak current requirements. Controller temperature must never exceed 100C (212F). Exceeding current or temperature ratings may damage components and shorten the life of the ESC. Always verify system current draw at full-throttle. Decrease load or increase airflow to decrease the ESC?s operating temperature.

**Peak indicates amperage sustainable for 0.5 seconds - long enough for most servos? current draw transients. Your setup may vary. Always confirm servo current draw before the first flight of the model.
Mer info på engelska
Flera tittade också på