Product details in english
2.4GHz FHSS receiver includes dual receiver circuits
KR-415FHD achieves a highly precise receiving performance with the use of a dual circuit and an external and internal antenna.
HCS compatible
The HCS mode shortens the communication time of the signal which has been compressed. KR-415FHD can change a mode to each channel 1-4 indiviually.
HCS is a communication method to largely improve linearity of the servo movement. When using HCS mode, correspondence servos (ex, RSx3/BSx3series) are required. The correspondence servo recognizes both modes automatically.
How to change the mode
1: Switch off the receiver and connect the mode selector to a channel that you would like changed.
2: While pushing the set button on the receiver, turn the power source ON. When the LED of the mode selector lights up, the change is completed.
The correspondence servo recognizes both modes automatically. So you do not change mode operation to the servo.
Initial setting of each channel
The HCS compatible receivers are equipped with 2 different modes, Normal and HCS. Normal mode is for non-HCS compatible servos, HCS mode is for HCS compatible servos. The default is set in Normal mode. You can use it for non-HCS compatible servos without re-setting. For use with HCS compatible servos, you need re-setting to change the mode to HCS, using RX mode selector (16031 separately available).
Contents
Receiver: KR-415FHDConnector cap
SpecificationDimensions: 30 x 23 x 12.8mmWeight: 8.0gOperation Voltage: 4.8 to 7.4VDual Antenna FHSS. DDS compatible.Number of channels: 4 (compatible with HCS and Normal)Shield Wire antennaGold Plated header pinsCompatible for HCS
Compatible models
EX-RR / EX-1(KIY) / EX-2(KIY) / Esprit4 / EX-5FH / RF-904FH / RF-903FH
Mer info på engelska