Produktinformation
Dquad Obsession 5inch 210mm FPV Race Frame V2 er en rollcage-modell laget av aluminium og karbon. Modellen har utbyttbare armer og er meget lett med 94 gram rammevekt. Rammen over elektronikken er av lekker aluminium med karbonforsterkninger, kamerafestet er optimalisert for HS1190 og kamerafestet har justeringer for vinkel.
PS! Produkten kan skilja sig från videon.
Läs merKlippet har lagts till som relevant information till produkten, men är inte nödvändigtvis identiskt. Innehållet i en produktvideo, testvideo eller recension kan skilja sig från produkten som säljs. Det kan gälla färger, specifikationer, versionsskillnader, regionala skillnader etc. Det är produktens namn, beskrivning och bilder som du ska hantera vid köp av varan.
OK
Obsession er desidnet av DQuad, ett Nederlandsk firma. Det tilbys også .stl filer for å 3D-printe egne GoPro Session mounts, se produsentens side. Ingen øvrig elektronikk følger med så man må kjøpe det utenom.
Spesifikasjoner
Rammestørrelse: 210mm for 5inch propeller
Rammevekt: 94 gram
Armer: 4mm karbon
Product details in english
Dquad Obsession whats that all about?
The Obsession is a Strong X quad what is suitable for indoor/outdoor, race/freestyle, advanced/middle/beginner.
This frame is easy to build and to service when needed. The frame has 4 swappable 4mm carbon arms that are coming together in the middle without any friction. Why not have a unibody that is 2 gram lighter? That?s because we like to give the pilots a opportunity to get up in the air asap and thats only possible when you have those nice swappable arms. These 4 arms are held together with a 1.5mm carbon bottom plate and a 1.5mm identical Top plate.
Its also possible to build it with the included 1.6mm thick PDB what makes it really nice. The PDB is not one with lots features on it. We like to keep this clean and simple therefore it has only the + and ? on it for the esc?s, power connector, and extra?s. On top of the PDB or top plate is enough room to double stack you hardware, like FC, 4in1 esc, VTX, OSD, RX, and so on.
Then we have our 7075 Aircraft Aluminium as a roll cage that has 2 1.5mm carbon side plates that holds the FPV cam in place. A recommended FPV cam for this is a HS1190. On the backside of the roll cage you will find a 2mm carbon VTX antenna mount. This VTX antenna mount is installed in a 45deg angle.
If you are doing stunts, races or just having the greatest time of your live in the air and like to capture that in HD than a HD action cam is needed. Action cams are having a hard time to survive on a quad. We have made a 3D Gopro session design in 30 and 40deg what can be fitted directly on top of the roll cage without the need of a strap. Just use 4 screws and you are ready to go. With this nice tide fitted and perfect protected Gopro session cam on your quad you will be able to show all your family and friends your best moments.
Gopro Session protection case 3D file available for download. Install session directly on top. No strap needed.
Specs
210mm size 5 frame
Frame weight 94 / 95 gram
4x 4mm carbon arms
2x 1.5mm Carbon bottom/top plate
1x 1.6mm PDB
2x 1.5mm FPV side plate
2x 7075 Aircraft Aluminium roll cage Bracket
1x 2mm VTX antenna mount
1x 3D designed XT60 connector holder (without XT60 connector)
1x Fastener kit incl: bolts, nuts and spacers
1x Battery strap
2x sticker
1x Manual QR code card.
Mer info på engelska
Delar
c
|
802
NYHET!
GRATIS FRAKT*
* Denna produkt kvalificerar sig för fri frakt. Övriga varor i samma beställning får då också fri frakt.
Undantag är varor med egna specifika fraktkriterier.
Tilbehør til Dquad Obsession. Passer også stretched-versjonen.
kr 199,-
0|0,-
Utan din rabatt kr 199,-
3|10|34
|
Delar du saknar? Klicka här!