Wondrous Drones Yin Yang er en freestyleramme for FPV som tåler mye og som samtidig har meget god balanse. Rammen er designet i Sverige av mr. Leksell og passer til standard elektronikk og motorer med 5" propeller. Diagonalavstanden er 212mm og armene er i 4mm-karbon. Dette er Sunken-utgaven som har ett stort hull midt i rammen, dette er der for å montere en 4i1-esc eller PDB så lavt som mulig.
Product details in english
This is the Sunken version of the Yin Yang freestyle frame
As the standard version of the Yin Yang this frame has perfect balance. What makes this version stand out is the big hole in the middle of the frame. This hole is made so that you can mount a 4in1 esc or PDB within the bottom of the frame. This helps you build with a very low center of gravity, you only need 10mm spacers to fit the FC, RX and VTX under the battery pack.
The quad is easy to build as you have the option to choose height of your spacers. This is good if you have a stack that is a bit higher. To make it even easier to build the quad you get a carbon rod that you cut off to the length you need, this rod is replacing the spacers normally use behind the FPV camera.
Frame highlights
Very beautiful frame design and cut!
Easy to build with many configuration options.
Possibility to use 3D printed soft mount and FPV camera mount.
Free download of 3D printed parts (.STL 3D file) like soft mount, FPV camera mount, go pro mounts and more.
All parts are replaceable as well as the arms.
Possible to use two strapps for the battery pack.
Can be configured with 4in1 esc or escs on arms.
Carbon FPV camera mount that is made for both the 1177 and newer cameras like Foxeer monster v2
Weight 104 grams (112 grams with Soft mount and 3D printed FPV mount)
212,5mm in diagonal
Whats included
The frame
Standoffs and screws
Build Advice
2206/7 motors with 5? Props
4in1 30a ESCs (or ESC on arms)
VTX, large or small will fit, with or without pigtail.
HS1177 Camera or similar
Mer info på engelska