Produktinformation
Hobbywing XRotor G2 er et ypperlig motorvalg til 250 race droner. Den har godt med kraft og god kjøling. Her leveres det 1stk børsteløs motor med loddeklare ledninger, propellmutter og skruer i forskjellige lengder til montering. G2 er tynnere, lettere, bedre kjøling og lavere tyngdepunkt sammenlignet med V1 utgaven.
Spesifikasjoner| Størrelse | 2205 |
| KV | 2300 |
| Vekt | 27,5g |
| LiPo | 4s |
| Anbefalte propeller | 5045 to eller tre-blads |
| Anbefalt ESC | XRotor 30A / 3-4S ECS |
Product details in english
| KV Rating | 2300 |
| LiPo Cells | 4S |
| No-Load Current(A/10V) | 1.6A |
| Motor Resistance | 0.057ohm |
| Max Continuous Current @ Power | 25A@420W |
| Size & Weight Stator Diameter/Thickness | 22mm/5mm |
| Slot/Plot Count | 12/14 |
| Motor/Shaft Diameter | 28.1mm/5mm |
| Motor Length (w/o, w/ Shaft) | 15.8mm/29.2mm |
| Weight | 27.5g |
| Recommended Props | 5045 Two-bladed/Three-bladed Propeller(s) |
| Recommended ESC | Xrotor 30A/3-4S ESC(s) |
Maximum thrust of up to 1.25KG provides sufficient power for FAV drone(s)Stator, rotor and shaft made of high-strength aluminum alloy greatly improve the shock resistance of the motor.Concave anti-skid teeth combined with locknut and special internal circlip (or snap ring) effectively prevent rotor from loosing or slipping and enhance the reliability of the motor.Neat winding with ultra low resistance guarantees the balanced current of the motor.Eight-bladed centrifugal fan reduces the operating temperature of the motor; clear rotation direction mark on the motor case helps installation.Low Vibration & Noise Special 200°C heat-resistant windings (after vacuum dip coating treatment) can stand high, surge current.N54 super magnets guarantee high torque output.Super thin silicon steel sheets imported from Japan guarantees low (power) loss, less heat generation but high magnetic permeability.Quality bearings imported from Japan guarantees smoother high-speed rotation and longerservice life.
Mer info på engelska
Delar
Hitta delarna enkelt
Denna produkt har PartFinder
Partfinder är designad för att göra det så enkelt som möjligt att hitta rätt del för produkten med hjälp av sprängskiss och/eller reservdelslistor.
Öppna PartFinder
c
Delar du saknar? Klicka här!