Produktinformation
E-flite har här skapat en mångsidig och fin modell. Snabb som jägare, men med förmågan att sväva, starta och landa som en helikopter / drone. Mycket ansträngning har gjorts för att skapa en bra automatisk övergång mellan svävar, snabbflygning och tillbaka till hovar. Allt detta finns i modellens flygkontrollant. Den här är förprogrammerad och den inställning du måste göra i sändaren är väldigt enkel.
Rekommenderade tillbehör
NYHET!
GRATIS FRAKT*
* Denna produkt kvalificerar sig för fri frakt. Övriga varor i samma beställning får då också fri frakt.
Undantag är varor med egna specifika fraktkriterier.
kr 165,-
0| 0,-
Utan din rabatt kr 165,-
3|554|523
PS! Produkten kan skilja sig från videon.
Läs merKlippet har lagts till som relevant information till produkten, men är inte nödvändigtvis identiskt. Innehållet i en produktvideo, testvideo eller recension kan skilja sig från produkten som säljs. Det kan gälla färger, specifikationer, versionsskillnader, regionala skillnader etc. Det är produktens namn, beskrivning och bilder som du ska hantera vid köp av varan.
OK
PS! Produkttexten är maskinöversatt från norska.
Denna utgåva kommer som PNP vilket innebär att du behöver en radio med 6 + kanaler och mottagare för den, såväl som batteri och laddare (se bulletlista).
Erforderliga tillbehörRadio och mottagare2200-3000MAh 3s LiPo batteriLiPo laddareSpecifikationerSpännvidd | 650Mm |
Längd | 680Mm |
Vikt | Ca 771 g |
Material | Skum och kol |
Motor | 2210-1450KV huvudmotorer och 2730-1550KV svansmotor |
NBBatteriet under rekommenderat tillbehör levereras med dekanans kontakt, en övergång krävs för att batteriet ska passa in i flygplanet.
Product details in english
Key Features
Multirotor versatility and sport plane agilityDesigned by champion pilot, Mike McConvilleExclusive flight control software makes it incredibly easy to flyStability and Acro Modes provide a wide performance envelopePowerful brushless motors for outstanding speed and climb performanceSuper-simple transmitter setup - no complex programming requiredFPV-ready with camera and video transmitter mounting stationsDurable Z-foam material
VTOL (Vertical Takeoff and Landing) RC models are usually a mixed bag when it comes to performance. If they are stable, their speed and agility is often lackluster. If they are nimble, pilots have to work harder to transition between hovering and airplane flight. The Convergence VTOL park flyer changes all that. Its unique design and exclusive flight control software give you the best of both agility and stability while making the transition between multirotor and airplane flight so smooth and predictable, you will feel right at home your first time on the sticks.
Sleek and Simple
Unlike complex VTOL aircraft that rotate the entire wing and require as many as four motors to achieve vertical and forward flight, the Convergence park flyer uses a simple, yet sleek, delta-wing design with three brushless motors - two rotating motors on the wing and a fixed-position motor in the tail.
In multirotor flight the wing-mounted motors rotate up into the vertical position to provide lift and flight control along with the motor in the tail. In airplane flight, the wing-mounted motors rotate down into the horizontal position and the models elevons take over pitch and bank control. Yaw control in airplane flight is provided by differential thrust from the wing-mounted motors.
Exclusive Flight Control Software Makes it Easy
At the heart of it all is flight control software that has been expertly tuned by designer, Mike McConville, so almost any RC pilot can experience the fun of VTOL flight.
Automated Transition
Making the transition between multirotor and airplane flight is as simple as flipping a switch. The flight controller will smoothly rotate the two wing-mounted motors into the correct flight attitude and activate the rear motor as needed.
Stability and Acro Flight Modes
These two flight modes give you a wide range of performance for every phase of flight.
Stability Mode:In multirotor flight, Stability Mode will limit pitch and bank angles and work to keep the model level when you release the sticks. This allows you to take off and land like a pro, even if youve never flown a multirotor before. In airplane flight, it will limit pitch and bank angles and automatically return the wings to level when the sticks are released.Stability Mode automatically engages during the transition between multirotor and airplane flight. It seamlessly maintains self-leveling and angle limits from one phase of flight to the other, making this the easiest RC VTOL experience you will find anywhere.
Acro Mode:In Acro Mode there are no angle limits or self-leveling in any phase of flight. During multirotor flight, the model will behave like a conventional multirotor that pitches and banks in whatever direction you want it to fly. It can flip and roll like other multirotors, too.In airplane flight, Acro Mode lets you perform a wide range of aerobatic maneuvers. And because you have the forward thrust of two brushless motors working for you, there is plenty of speed and power to spare. You can even use the differential thrust of the motors to perform unique spinning and tumbling maneuvers.
FPV Ready
The model is designed to accommodate several of the most popular FPV camera systems. There is a camera bay under the nose and a place to mount the video transmitter in the rear of the aircraft. Both locations are easy to access so installation takes just a few minutes.
Recommended FPV System - All Items Sold SeparatelySpektrum 650TVL CCD FPV Camera NTSCSpektrum 25mW 5.8GHz Video TransmitterPower AdapterSpektrum 4.3-Inch Video Monitor with Headset
Super-Simple Transmitter Setup
This Bind-N-Fly version can be flown with any full-range, 6+ channel DSMX/DSM2 aircraft transmitter and comes equipped with a Spektrum serial receiver that is connected to the flight controller. No complex transmitter setup or programming is required. You use your "GEAR" switch for selecting Stability or Acro mode and your "AUX 1" switch to transition between multirotor and airplane flight.
Mer info på engelska
Delar
Hitta delarna enkelt
Denna produkt har PartFinder
Partfinder är designad för att göra det så enkelt som möjligt att hitta rätt del för produkten med hjälp av sprängskiss och/eller reservdelslistor.
Öppna PartFinder
c
Delar du saknar? Klicka här!