Produktinformation
Helio Spring IMU-F V2
Specifikationer:
Processors: F4 & F3, STM32F405 & STM32F301
IMU: ICM 20601
OSD: Full Betaflight OSD support
Motor Outputs: Full DSHOT and MULTISHOT support.
Receiver Support: PPM, S.Bus (inverter built-in), DSM, HoTT, SRXL, CSRF, FPort ready. 5V or 3.3V supply for receiver.
Product details in english
Truly FreeingSupported by multiple open source flight controller software including ButterFlight?s 3.3+ most current technologies
Natively FastTrue 32khz processing without overclocking
IMU-F
Never before seen IMU-f system an advanced inline discrete filtered gyro that is transparent to the flight controllerWith a super clean discrete filtered gyro, more processing power is available for flight controller logic and future feature updates without causing slowdown or issues during flight
Helio GyroThe hardware contains both an f3 (IMU-F) and an f4. The gyro is a IMU 20601.
SpecificationsProcessors: F4 & F3, STM32F405 & STM32F301IMU: ICM 20601OSD: Full Betaflight OSD supportMotor Outputs: Full DSHOT and MULTISHOT support.Receiver Support: PPM, S.Bus (inverter built-in), DSM, HoTT, SRXL, CSRF, FPort ready. 5V or 3.3V supply for receiver.Telemetry Support: FrSKY Smart Port, FrSKY Sensor Hub, HoTT Telemetry, SRXL, CSRF, FPort ready. Built-in inverter for FrSKY telemetry.Serial Ports: 5 full serial ports (UARTs). UART1 and UART2 have inverters for S.Bus and SmartPort telemetry.Buzzer Port: Dedicated port for 5V (100mA max) buzzers.Analog Inputs: Voltage sensing up to 26V, current and RSSI inputs (3.3V max).Power: VBAT up to 6s with voltage regulator 2.5A continuous 3.2A burst. Or 5v in (switchable with jumper pads)100% free of Jenova DNA
Mer info på engelska
Delar
Hitta delarna enkelt
Denna produkt har PartFinder
Partfinder är designad för att göra det så enkelt som möjligt att hitta rätt del för produkten med hjälp av sprängskiss och/eller reservdelslistor.
Öppna PartFinder
c
Delar du saknar? Klicka här!