KO Propo KG-X Gyro är ansluten mellan mottagare och styrkraft. Gyroten hjälper till att korrigera bilens rörelse, som inte kommer som ingång från sändaren / föraren. Hjälper till exempel mycket med att driva.
Product details in english
KG-X is Intelligent steering assist Gyro unit which is optimized for use with RWD drift car.
Next generation Gyro system, covering all required functions for Drift cars, such as AGC function, End point adjust (each L/R ) function, PCA function, etc.
AGS restrains vibration of servo!?
With a conventional gyro system, servo vibrations occur when increasing gain setting.The AGC function equipped with KG-X enables to stop the vibration and operate servo normally.
Independent setting for right and left!
KG-X enables settings of end point of servo independently for each side(L/R). This function is effective;
1), To limit the maximum movement angle of servo to protect linkage and knuckle etc. from damage.2), To secure the same movement angles for the both end points.
Settings are to be kept memorized until next setting.
Feel steerage just as wanted!?
PCA is the abbreviation of Priority Control Adjuster. The mixing ratios of the gyro signal and steering signal can be changed. Steering control performance can be obtained without feeling the use of the gyro.
Remote control of gain by 3ch. signal input?
After connecting 3ch input port of KG-X to the port connect to 3ch (or 4ch) of the receiver, the Gyro gain can be changed by operating 3ch (or 4ch) of transmitter while driving a R/C car.
HCS Compatible.
HCS (High speed Communcation System) is the new high speed communication system between the receiver to the servo. The HCS mode shortens communication time of the signal which is compressed. HCS compatible servos are disigned to change its mode automatically according to a signal from receiver to operate with all KO receivers.
Aluminum case for Light weight and high stiffness with Cool design.
The outer case of KG-X is made of aluminum.After Alumite processing, extra processing of milling and laser printing are applied to make the stylish design more attractive
[Specifications]
High Speed response compatible(Normal mode/HCS mode)AGS functionEnd point AdjustmentPCA functionInput channel: 2ch (Steering signal: 1ch)Operaing voltage: 4.8 to 7.4VDimensions: 20.0 x 24.0 x 14.0mmWeight: 8.3gAluminum heavy duty outer case
Mer info på engelska