Produktinformation
Fc var defekt ur rutan, detta har ersatts och testats ok. Komplett i rutan.
PS! Produkttexten är maskinöversatt från norska.
För att flyga den här versionen behöver du batteri, radio och DJI FPV Goggle. Med radio kan både DJI Remote Controller, eftersom ingen ytterligare mottagare behövs, och andra märken som FrSky och Spectrum kan väljas med extra mottagare monterad. Se rekommenderade tillbehör.
Notera!GPS bör endast aktiveras och användas om man flyger minst 100 meter från sig själv, men detta kan ändras i programvara.
Både Air Unit och flight controller använder USB-C, inte mikro-USB.
Ingår i paketet:Titan XL5 HD-ramDJI Air Unit-modulLuftaggregatfäste och antennhållareTPU-delar2X iFlight-batterirem2X Nazgul 5140 Propeller (placerad på 4)4X XING 2208-motorerSucceX D F7 FCSucceX BlHeli32 50A 4in1 ESC2X luftenhetsantenner (MMCX 90 grader)GPS-modulNödvändiga tillbehör:Batteri 4S ~ 1550mAhDJI HD FPV-glasögonDJI Remote Controller (Mode 2) eller annan 6+ kanalradioMottagare för alternativ radioLaddare| Specifikationer | |
| Hjulbas | 250Mm |
| Armtykkelse | 6Mm |
| Basplatta | 2Mm |
| Toppplatta | 2Mm |
| Storlek | 185 Mm * 133 mm |
| Vikt | 484G utan batteri |
Product details in english
Product Description
Please be aware that the TBS Crossfire nano RX Drones might delay to be shipped, depending on the RX back time. We will try to ship every one order as soon as possible.Thanks.
The TITAN XL5 w/ DJI Air Unit BNF features the amazing new DJI FPV system, this quad makes flying FPV truly breathtaking. With the 720p video shown at 120fps through the goggles, DJI has set the bar at a new high for clarity and image quality in an FPV system. Equipped with our latest SucceX-D F7 (50A 4-in-1 ESC) Stack and our popular XING motors. Everything you need ist just bind-and-fly!
After our popular TITAN DC5 (DeadCat style frame) approach we decided to take a step back to the roots and create a new X-Geometry frame to get the best performance on both axis and better weight distribution for freestyle.
HIGHLIGHTS:
- 6mm arm design for more durability
- XING 2208 motors for more power
- GPS pre-installed for more safety at distance
PRE-TUNED & PRE-SETUP:
- Dont worry about tuning, we did that for you already! A basic PID- and Filter tuning was appplied for a great flight experience!
- GPS-rescure mode is configured and just needs to be enabled in your Betaflight Configurator! (Please be aware of how it works before you use it!)
- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesnt end in a mess!
- Motor Power is configured to 70% throttle limit (scaled) by default to give more throttle stick resolution for an easy start on the 6S 1800kv version. Need more Power? Just enable 100% in the Betaflight Configurator to unleash the Beast!
FRAME // TITAN XL5?
- Weight ?145g
- Wheelbase: 250mm
- Main body dimension: 185*133mm
- Bottom to top distance: 30mm
- Arm thickness: 6mm
- Bottom plate thickness: 2mm
- Top plate thickness: 2mm
- Camera plate thickness: 2mm (2.5mm included TPU inserts)
ELECTRONICS // SucceX-D F7 Stack (50A 4-in-1 ESC)?
- Universal USB Type C connector instead of micro USB
- Plug-and-Play DJI support. No need to solder tiny wires!
SucceX-D F7
with 216MHz STM32F722 with 2x ICM20689 Gyros ready for SensorFusion.
Up to 8S, Barometer, 32MB Blackbox Flash and 5V/9V to power all you might need.
SucceX 50A 4in1
with BLHeli_32 up to 48kHz, 8 layers double-sided PCB and Top grade Mosfets.
BNF // Parts list (Build)
- 1x TITAN XL5 HD Frame
- 1x DJI FPV Camera
- 1x DJI FPV Air Unit Module
- 2x DJI FPV Air Unit Antenna SMA
- 1x TPU Bracket for DJI Air Unit Module
- 1x TPU Antenna holder for DJI antenna
- 2x TPU camera side plate soft mount
- 1x TPU lens cover
- 1x iFlight Lipo Strap
- 2x Nazgul 5140 Propeller (Set of 4 - Color May Vary)
- 4x XING 2208 Motor Unibell?4S 2450KV?6S 1800KV?
- 1x SucceX-D F7 Flight Controller
- 1x SucceX BLHeli32 50A 4-in-1 ESC 2-6S
- 2x MMCX to RP-SMA Female Adapter Cable
- 1x GPS Module
Mer info på engelska
Delar
Hitta delarna enkelt
Denna produkt har PartFinder
Partfinder är designad för att göra det så enkelt som möjligt att hitta rätt del för produkten med hjälp av sprängskiss och/eller reservdelslistor.
Öppna PartFinder
c
Delar du saknar? Klicka här!