Gratis frakt över 1.500 kr. Vi förtullar!
HemDrönare för FPV RaceRace drönareFPV Racers Färdigbyggd
Skriv produktblad

iFlight ProTek35 Analog 4S w / XM + - BNF

Tillhör kategori
FPV Racers Färdigbyggd
Handla nu, dela upp eller betala senare. Läs mer
kr 4.295,-
3|1|1124
ArtikelID: 50934, Produktnr: C009168
Produktinfo
Rekommenderade tillbehör
Delar
Tipsa en vän
Recensioner

Produktinformation

Flight ProTek35 HD kommer hit med 3600KV Xing 2203.5-motorer för 4S LiPo. Analog videosändare och Caddx Turbo Eos V2-kamera förmonterad så här är det mesta tydligt. Modellen är förinställd för smidig flygning och med T700-kol har du också en ram som är mycket stel och hållbar.

Rekommenderade tillbehör

PS! Produkttexten är maskinöversatt från norska.

För att flyga den här versionen behöver du ett batteri, FrSky-kompatibel radio och analoga FPV-glasögon. XM + -mottagaren är EU_LBT D16.

iFlight ProTek35 Analog 4S w / XM + - BNF

GoPro och gopro mount ingår inte. Bilder kan visa TBS-mottagare men det här paketet är med FrSky XM +.

iFlight ProTek35 Analog 4S w / XM + - BNF

Ingår i paketet:
  • Protek35 ram
  • Caddx.us Turbo Eos V2 FPVCam 2.1mm 16: 9 NTSC
  • 1 X Albatross-antenn
  • 2 X Nazgul 3535 propelleruppsättning
  • 1 X TPU naken Gopro bottenstativ
  • 2X iFlight batterirem
  • 4X XING 2203.5 motorer
  • True-AIO Board Beast Whoop F7 AIO 45A


  • Nödvändiga tillbehör:
  • Batteri 4S + -1300mAh XT60
  • FPV-skyddsglasögon
  • 6+ Kanals radio FrSky D16
  • Laddare
  • Specifikationer
    Hjulbas151Mm
    Bottenplatta3,5 Mm
    Topplatta2Mm
    Vikt305G utan batteri
    Product details in english
    PRODUCT DESCRIPTION
    After our very popular 3inch Cinematic EVA bumper BumbleBee and Green Hornet CineWhoop series, we were trying to increase performance and reduce weight for an even better and longer flight experience for a wide variety of use.

    Our all new 3.5inch project is finally ready for all you content creators or those guys who like to wear some protection every now and then. Prop protection is what were talking about here...

    ProTek is not necessarily just a Cinewhoop series but far more. Equipped with our all new 2203.5 motors for more power and less heat. We were able to increase speed and thrust by 50% compared to its 3inch predecessor which gives a lot more room for a lot more fun. Our GPS measured maximum speed was above 120km/h and a maximum thrust of 750g per motor (3kg in total) would even carry heavier cams than a Gopro but also do some loaded punch outs or light freestyle moves.

    A lot of thought was put into the different assembly options. Our stock BNF will ship in the standard configuration but you can either do a pusher mod (flip the build upside down) or a lite mod (remove the protective plastic for weight optimization).

    Durable plastic protectors with copper standoffs, portable compact design, easy accessable UBS port without disassembly, LED battery status, lost model buzzer and a universal GoPro TPU for a full size or naked GoPro. If you wanna go extra light, get one of our 5V balance plug GoPro power cables to get rid of the internal battery.

    Features:
    - No Props or frame in view!
    - High performance True-AIO Board Beast Whoop F7 AIO 45A to save weight and space
    - T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
    - Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
    - Low Resonance frame construction (Less Jello, more Cinematic footage)
    - Caddx.us Turbo Eos V2 FPVCam 2.1mm 16:9 NTSC
    - Butter smooth 2203.5 3600KV (4S)
    - Pre-tuned with smooth freestyle settings

    PRE-TUNED & PRE-SETUP:
    - Dont worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
    To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"
    - Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesnt end in a mess!
    Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"

    ProTek35 BNF Specs:
    - Board Beast Whoop F7 AIO 45A (LINK)
    - Motor: XING 2203.5 3600KV (4S)
    - Wheelbase: 151mm
    - Body Size: 118*94.5mmmm
    - Bottom plate thickness: 3.5mm
    - Top plate thickness: 2mm
    - Top and bottom plate spacing: 20mm (aluminum standoff height)
    - Propeller size: 3.5 inch
    - FC pattern: 25.5*25.5mm / 20*20mmmm
    - FPV cam spacing: 20mm
    - Weight: 305g (without battery)

    ProTek35 Quad BNF Included Components and Parts
    pre-built and tested Quadcopter
    - 1x ProTek35 Frame
    - 1x Caddx.us Turbo Eos V2 FPVCam
    - 2x TPU camera side plate soft mount
    - 2x Nazgul 3535 propeller (Set of 4 - Color May Vary)
    - 1x iFlight Lipo Strap 15*150mm (Color May Vary)
    - 1x iFlight Lipo Strap 15*250mm (Color May Vary)
    -1x GoPro TPU bottom stand black (GoPro Protector not included)

    FC // Beast F7 AIO (LINK)
    Specification:
    MCU: BGA-STM32F745
    Gyro: MPU6000
    Blackbox: 8Mb Onboard Flash
    BEC output: 5V 2.5A
    Barometer: BMP280
    Connector: Micro-USB
    OSD: AT7456E
    FC Firmware?IFLIGHT_F745_AIO
    Mounting pattern: 25.5*25.5mm ?3mm
    Dimensions: 32.5*32.5mm
    Weight: 8.5g

    ESC // 45A 2-6S
    Specification:
    Uarts: 5
    Current Sensor: Yes
    Input: 2-6S LIPO
    Current scale: 200
    Constant: 45A / Burst: 50A
    BLHeli: BLHeli-S
    Telemetry: no
    ESC Firmware: BlheliS G-H-30
    Mounting pattern: 25.5*25.5mm/?3mm
    Dimensions:?32.5*32.5mm

    VTX// 5.8GHz SucceX Micro 300mW VTX (LINK)
    -Power: PIT/25/100/200mW/300mW
    -Antenna interface: IPEX (UFL)
    -VTX protocol : IRC Tramp
    -Size: 13.5x14.5mm
    -Weight: 1.4g
    Size Extender (stackable adapter):
    Mini VTX size: 20x20mm, 2mm hole, total weight (incl. VTX): 3.4g
    Whoop VTX size: 16mm/25mm, 2mm hole, total weight (incl. VTX): 2.9g

    Recommendation of battery
    * Fullsend 4S 95C 1300mAh (LINK)
    Mer info på engelska

    Rekommenderade tillbehör

    Bronto Lipo-Safe Bag 30x23cm (L)
    3|179|523
    kr 119,-
    4s 1500mAh -100C - CNHL FPV Black Series XT60
    3|130|314
    kr 259,-
    SkyRC T200 12 / 220V 2x100W Laddare
    3|23|235
    kr 1.399,-
    4s 1550mAh -100C - Gens Ace FunFly XT60
    3|32|314
    kr 359,-
    4s 1300mAh -100C - Gens Ace FunFly XT60
    3|14|314
    kr 299,-
    Fat Shark Scout FPV-Goggles
    3|16|932
    kr 2.595,-
    SkyRC S65 220V 2-4S Laddare 65W
    0|0|235
    kr 549,-

    Produktrecensioner

    Tyvärr ingen feedback om denna produkt ännu.

    Ge din feedback
    Produkt
    iFlight ProTek35 Analog 4S w / XM + - BNF
    Välj betyg
    Rubrik
    Produktrecension
    Riktlinjer
    Produktrecensioner är avsedda för att du ska dela din upplevelse med andra som söker kunskap om produkten. Irrelevant, oriktigt eller stötande innehåll kommer att tas bort.

    Frågor, reklamation e.l: kontakta oss direkt
    Flera tittade också på