Produktinformation
Hobbywing XRotor Micro BLHeli 35A ESC
Liten og lett fartsregulator til FPV-racers. Takler 3-6s LiPo inn. Leveres med ledninger på strømtilførsel og uten motorledninger.
| Størrelse | 36,5 x 16,7 x 5,5mm |
| Vekt | 10g |
Product details in english
| Application | FPVs with 150-330mm Diagonal Wheelbase |
| LiPo Power input | 3S-6S |
| Cont.Current | 35A |
| Burst Current | 50A (burst in 10 sec) |
| BEC Output | N/A |
| Input wires | 18AWG-100mm* (Red/Black) |
| Output Wire | Solder tabs (no wires) |
| Connectors (In/Out) | no |
| Size | 36.5x16.7x5.5mm |
| Weight | 10g |
* Note: All the wire length above is the original length, not the length you see from the outside.
Premium MOSFETsToshiba MOSFETs for 20A &35A ESCs
Ultra high efficiency & rapid response4 layers of PCBs and other quality components guarantees less heat.
BLHeli Firmware ReadyUsers can flash or upgrade the BLHeli firmware via the signal cable (on ESCs), and program 4 ESCs simultaneously after connecting their flight controller to the BLHeliSuite software if the flight controller uses the CleanFlight firmware.
Damped Light Mode & OneShot125 Mode SupportedDamped light mode improves the motor retardation and allows users to brake the FPV drones more efficiently. Active-freewheeling technology improves driving efficiency, flight time and heat dissipation.
Super Small & Light architectureF396 48MHz MCUCeramic capacitors3-in-1 drive ICs, 3-ounce copperSupport OneShot125 high speed throttle signal and regular throttle signal (within 500Hz) modes
Mer info på engelska
Delar
Hitta delarna enkelt
Denna produkt har PartFinder
Partfinder är designad för att göra det så enkelt som möjligt att hitta rätt del för produkten med hjälp av sprängskiss och/eller reservdelslistor.
Öppna PartFinder
c
Delar du saknar? Klicka här!