Produktinformation
Ljud- och ljusindikator som larmar när mottagaren inte tar emot signal från sändaren. Använder man denna i bil blir du underrättad när mottagaren inte får signal från sändaren och om den används för flygplan kan detta hjälpa till att lokalisera planet då du kan stänga av sändaren för att få buzzern att pipa.
The Signal Loss Alarm & Lost Aircraft Finder is controlled by a tiny MCU. As simple device, it can be plugged into any servo/RX port, will detect the loss of TX signal and emit a loud 85dB alarm. Ideal for warning you if you have not turned off your RX power supply while in the pits, or if you are having trouble finding a model in the long grass, simply turn off your TX the alarm will sound and the red LED will start to blink! With its versatility and small size, the Signal Loss Alarm & Lost Aircraft Finder is a must-have accessory for fliers.
If you dont want the alarm to beep after one minute. You can disable one minute TX inactive warning by simply move the switch to mode 2.
Features:
Loud 85dB alarm gets your attention.
Built-in LED.
Can be used as a reminder to turn off the R/C receiver.
One minute TX inactive warning can be turn off (Mode 2).
Plugs into any standard 4.8 - 6.0 V DC powered receiver.
Average current draw is under 2.5mA when idle, 50mA during alarm.
Small size and weight (7-grams).
Product details in english
The Signal Loss Alarm & Lost Aircraft Finder is controlled by a tiny MCU. As simple device, it can be plugged into any servo/RX port, will detect the loss of TX signal and emit a loud 85dB alarm. Ideal for warning you if you have not turned off your RX power supply while in the pits, or if you are having trouble finding a model in the long grass, simply turn off your TX the alarm will sound and the red LED will start to blink! With its versatility and small size, the Signal Loss Alarm & Lost Aircraft Finder is a must-have accessory for fliers.
If you dont want the alarm to beep after one minute. You can disable one minute TX inactive warning by simply move the switch to mode 2.
Features:
Loud 85dB alarm gets your attention.
Built-in LED.
Can be used as a reminder to turn off the R/C receiver.
One minute TX inactive warning can be turn off (Mode 2).
Plugs into any standard 4.8 - 6.0 V DC powered receiver.
Average current draw is under 2.5mA when idle, 50mA during alarm.
Small size and weight (7-grams).
Mer info på engelska
Delar
Hitta delarna enkelt
Denna produkt har PartFinder
Partfinder är designad för att göra det så enkelt som möjligt att hitta rätt del för produkten med hjälp av sprängskiss och/eller reservdelslistor.
Öppna PartFinder
c
Delar du saknar? Klicka här!