Produktinformation
Vert Free 5" är en innovativ Freestyleram från Hyperlow med en vikt på 120g.
PS! Produkten kan skilja sig från videon.
Läs merKlippet har lagts till som relevant information till produkten, men är inte nödvändigtvis identiskt. Innehållet i en produktvideo, testvideo eller recension kan skilja sig från produkten som säljs. Det kan gälla färger, specifikationer, versionsskillnader, regionala skillnader etc. Det är produktens namn, beskrivning och bilder som du ska hantera vid köp av varan.
OK
Med hjälp av dubbla 5mm armar får ramen en väldigt robust armkonstruktion där man snabbt och lätt kan byta ut en arm. Man kan välja att bygga med stackhöjd på 15 eller 10mm.
Inkluderat i paketet
Hyperlow Vert Free1 extra armGopro fäste 3 batteristrapsBatteri och antenn-fästeKamerafäste (mikrokamera)AntennrörMonteringstillbehör
Product details in english
Big brother to the VERT RACER, this low profile - stretched X - mid-mount - vertical arm design (developed by Bob Roogi) now carries a GoPro! Mount included.
Build at a Hyperlow 10mm with an AIO and ESCs on arms, or at 15mm with the included carbon spacers for a 4 in 1 + FC stack build. (SPEDIX 30A and Revolt is an effortless fit). Both sets of hardware included.
The 5mm carbon arm spacers used for a 15mm build even allow you to offset the front and rear prop planes by raising the rear arms for cleaner air, avoiding prop wash.
The frame maintains a slim body profile thanks to the strap plate borrowed from the UNIBODY series. This allows for dual straps use without compromising main plate integrity, and adds a lateral battery mounting option. The battery is also cushioned by a custom neoprene pad, along with a smaller pad for the VTX antennas SMA
Mid-Mount
Lowering the battery all the way into the prop plane gives the most neutral control possible. Motors do not have to work as hard to balance a higher CG, making for more fluid control and much smoother transitions. Fast acro maneuvers are effortless, and the acceptable tuning window is greatly increased. Feels just like a sim. -Less bolts and no more M2 bolts. ALL M3
Ships with free spare arm.
Key Features:
Mid-mount 5" freestyle frameVertical amsStretched X10mm + 15mm hardwareGoPro MountDouble strap plate3 Battery strapsLateral battery mounting optionRX antenna mounts, straws and capsBattery and antenna padsPressnut assemblyOffset rear prop planeShips with extra armMicro cam only - mounts included
Kit Parts List
Carbon:1 x 2mm top plate1 x 2mm bottom plate1 x 2mm camera bumper1 x 1.5mm strap plate4 x 5mm arm spacers (for 15mm build)5 x 5mm arms5 x 5mm arm brace
FPV MountsTPU micro cam mounting set
Session Mount2 x TPU prints2 x 30mm standoffs4 x bolts
RX Antenna2 horizontal mount2 angled mountsStraws + Caps
Pads:1 x Battery pad1 x Antenna pad
FC Mounting4 x 1mm nylon washers 4 x 5mm nylon standoffs4 x nylon nuts
Hardware6 x 10mm standoffs6 x 15mm standoffs8 x 22mm bolts (for 15mm arms)8 x 16mm bolts (for 10mm arms4 x 14mm bolts (for arm to brace attachment)4 x locknuts (for arm to brace attachment)6 x 12mm bolts6 x 10mm bolts4 x 8mm12 x nylon nuts
Mer info på engelska
Delar
Hitta delarna enkelt
Denna produkt har PartFinder
Partfinder är designad för att göra det så enkelt som möjligt att hitta rätt del för produkten med hjälp av sprängskiss och/eller reservdelslistor.
Öppna PartFinder
c
Delar du saknar? Klicka här!