Produktinformation
F7 flygkontroll för FPV-drönare med 20x20-fäste. Fungerar bra med DJI HD FPV-system, ingår i kablar som gör allt till PNP. Ansluts med USB-C, inte mikro-USB. 5UART, 4 motoranslutningspunkter.
PS! Produkttexten är maskinöversatt från norska.
Denna FC har iFlights smart TwinG, som är två gyror orienterade 90 graders mellanrum. Genom att kombinera dessa signaler med GYRO FUSION erhålls en mycket renare signal för PID-regulatorn.
SpecifikationerMCU | 216MHz STM32F722 |
Vikt | 6Gram |
Gyro | 2X ICM20689 |
Svart låda | 32 MB inbyggd |
UART | 5Stk |
ESC-port | 8-Stift (GND, VBAT, M1, M2, M3, M4, CUR, R5) |
VTX-port | 6-Stift (R1, GND, R2, T2, GND, 9V) |
Inn-spänning | 2-6S |
Mått | 29X29mm |
Product details in english
The SucceX-D Mini F7 is designed to work seamlessly with DJI?s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module.
But the real magic of this flight controller lies in its TWIN GYRO configuration.
The TwinG uses two identical gyros oriented side by side with one offset 90 degrees from the other. Betaflight uses GYRO FUSION to blend and average the information from both gyros to send a much cleaner signal to the PID loop controller! Less noise and fewer oscillations across the throttle band without adding any delay! Betaflight software filters can be lowered in most cases as well, which brings a significant decrease in delay.
With plenty of processing power and UARTS, this is also the perfect flight controller for long-range GPS builds. And the TwinG configuration makes it the perfect FC for builds like macro quads, cinematic filming rigs and x-class racers that are a bit trickier to tune.
Mer info på engelska
Delar
Hitta delarna enkelt
Denna produkt har PartFinder
Partfinder är designad för att göra det så enkelt som möjligt att hitta rätt del för produkten med hjälp av sprängskiss och/eller reservdelslistor.
Öppna PartFinder
c
Delar du saknar? Klicka här!