Produktinformation
Styrenhet med kraftfull BEC för Jeti Duplex telemetrisystem. Innehåller sensorer för spänning, ström, strömförbrukning och temperatur. Mycket bra programvara med många justeringsalternativ. Gaskanalen kan anslutas till EX-bussen för signalöverföring och telemetri på samma kabel.
PS! Produkttexten är maskinöversatt från norska.
Mått | 26X28x83mm |
Vikt | 110G |
Telemetri | Ja |
Max ström | 80A |
Spänning | 6-51V |
LiPo | 2-12S |
BEC | 5-8.4V/15A |
Product details in english
Powerful MEZON PRO controllers can be used in a wide variety of applications. They come with strong BEC, full JETI Duplex EX telemetry and programmability via the Device Explorer of JETI Duplex DS/DC transmitters. Forward/reverse motor operation is also possible.
In addition, the throttle channel can optionally be connected to the receiver "EX Bus" port. A separate output pin for a throttle channel is therefore not necessary at the receiver, telemetry and control signals are transferred in both ways via just a single cable.
Properties
Compact sizeSetting via the Device Explorer of the JETI DC / DS transmitterReal-time telemetry via JETI Duplex EX Bus (perfect for JETI DC / DS transmitters)Telemetry data: battery voltage, battery current + BEC current, used battery capacity, RPM, PWM, controller temperatureTelemetry data reset by any transmitter switchPowerful BEC, ideal when using JETI Assist or other gyro systems in a modelBEC with a wide input voltage range and adjustable output voltageActivation of the throttle channel from the EX Bus is possible; the receiver then does not have to offer its own slot for the throttle channel.Programmable with JETBOXOperating modes: Model aircraft, forward / reverse operationProportional brake with a definable braking point at the throttle stickF3A brake conveniently adjustable via the Device ExplorerHeat sink for long engine run timesHigh efficiencyFirmware upgrade possibleWide range of adjustable parameters
Mer info på engelska
Delar
Hitta delarna enkelt
Denna produkt har PartFinder
Partfinder är designad för att göra det så enkelt som möjligt att hitta rätt del för produkten med hjälp av sprängskiss och/eller reservdelslistor.
Öppna PartFinder
c
Delar du saknar? Klicka här!