Gratis frakt över 1.500 kr. Vi förtullar!
HemRadioutrustningÖvrig utrustning till sändareStrömsystem
Skriv produktblad

PowerBox Evo inkl MicroSwitch

Tillhör kategori
Strömsystem
Handla nu, dela upp eller betala senare. Läs mer
kr 2.995,-
3|1|172
ArtikelID: 59663, Produktnr: PB-4250
Produktinfo
Tipsa en vän
Recensioner

Produktinformation

7 kanaler
Med strömbrytare
Kraftfull
7-kanals PowerBox med strömbrytare
PS! Produkttexten är maskinöversatt från norska.

Spänningsområde4,0-9,0V
Strömförsörjning2S LiPo, 2S LiIon, 2S LiFePo, 5S NiMH
Strömförsörjning påslagen66MA
Strömförbrukning i standbyläge8 MikroA
Maximal effekt2X10A kontinuerlig. 2x40A (<30s)
Spänningen ut6,0V, 7,4V, 7,8V, oreglerad
Signal inPWM
Product details in english
Features
7 channels
10 outputs
High-performance battery backer with high continuous load capacity
All power electronics duplicated
Redundant electronic switch
Four selectable output voltages: 6.0V, 7.4V, 7.8V or unregulated

Telemetry data for PowerBox P²BUS, Futaba S.BUS2, Jeti Ex-BUS, Spektrum, SRXL2, Multiplex M-Link, JR X-BUS and Graupner HoTT
All features can be controlled from PowerBox and Jeti transmitters
Signal amplification for all 10 outputs
Voltage indication by means of tri-colour LEDs
Supports four battery types: LiPo, LiIon, NiMh/NiCd, LiFe
Servo feedback current suppression
Machined high-performance heat-sink for optimised heat dissipation
Machined, anodised aluminium switch case
Compact format

Set contents
PowerBox Evo
MicroSwitch
8x patch leads
6x fixing screws
4x rubber grommets and brass sleeves
Operating instructions

Product description
The PowerBox Evo is an ultra-compact dual power supply featuring 7 channels, regulated output voltage and telemetry.

The 7 inputs are assigned to 10 outputs, allowing two servos to be controlled in parallel on each of 3 channels, without requiring additional Y-leads. All servo outputs have integral signal amplification and are protected against servo feedback currents.

The PowerBox MicroSwitch included in the set is not subject to wear, and operates both electronic switches reliably. It is also used to set the output voltage and the battery type.

By default the two high-performance voltage regulators deliver 6.0V, but that value can easily be changed to 7.4V, 7.8V or no regulation at all using the PowerBox MicroSwitch.

The machined aluminium heat-sink ensures a high continuous load capacity.

The PowerBox Evo supports all current telemetry systems: PowerBox, Jeti, Futaba, Multiplex, Graupner, Spektrum and JR, which means that the voltage of both batteries can be monitored conveniently from the transmitter. It is also possible to read off the state of charge of the batteries at any time using the two tri-colour LEDs.
Mer info på engelska
Flera tittade också på