Gratis frakt över 1.500 kr. Vi förtullar!
HemMotor & tillbehörElmotor & tillb.Motor/Fartsreglage-tillbehör
Skriv produktblad
(1)
Tillhör kategori
Motor/Fartsreglage-tillbehör
Handla nu, dela upp eller betala senare. Läs mer
kr 409,-
3|3|1136
ArtikelID: 23022, Produktnr: CC011-0002-02
Produktinfo
Tipsa en vän
Recensioner

Produktinformation

CC CapPack kan vara en fördel i de flesta borstlösa motorsystem för att ge den lilla extra boost som behövs för att frigöra volt-suger orsakade av hård acceleration eller långa batterirör. Kom ihåg att instabila volt är svåra för regulatorn, och CC CapPack hjälper till att minska belastningen på regulatorns inbyggda kondensatorer.
PS! Produkttexten är maskinöversatt från norska.

CC CapPack är designad för enkel montering. Skär helt enkelt av den mjuka silikonisoleringen på batteriledningarna (gör detta så nära regulatorn som möjligt) och placera ledningarna i kanalerna på CC CapPack-anslutningarna. Kontrollera noga att polariteten är korrekt innan lödning av ledningarna till anslutningarna. Använd den medföljande krympfolien för att ge den en professionell finish.
Du kan använda flera CapPack tillsammans. De bör sedan placeras så nära styrenheten som möjligt.


Product details in english
Helis:
CC CapPack is highly recommended for all 500 class and larger heli applications where Y harnesses and long wires can bleed voltage and hard collective pulls can strain even the most powerful batteries.


Cars/Trucks:
With their high torque requirements - going from 0 to 100% throttle isnt easy on controllers or batteries - RC cars and trucks put enormous loads on brushless power systems. Use CC CapPack to help your system power through the abuse.


Aircraft:
Larger electric power systems lead to larger electric powered aircraft, and sometimes the distance between the battery pack and the ESC grows beyond the length of the wires installed on the components. Adding wire also adds inductance, which can increase the ripple voltage in a system. CC CapPack essentially negates the ripple caused by the addition of up to 8 inches of length to the battery wires.


Note:
All Castle controllers with data logging capabilities can report the ripple voltage they encounter during use. Ripple voltage peaks should always be less than 10% of the total pack voltage; the smaller the ripple voltage the better. If an application exhibits more than 10% ripple voltage under peak loads, the user should consider using higher discharge (C Rating) batteries, shorter wires, higher current connectors, better gearing or a smaller load.
Mer info på engelska

Produktrecensioner

Användaren har endast angett betyg
12.03.2024 av Noah
Detta hjälpte mig
Visar 1 / 1 kommentarer
Ge din feedback

Flera tittade också på